See the documentation guidelines for general rules when creating documentation.
arrays(and the special case of matrices) have a
dimattribute that sets them apart from R's "atomic vectors" which have no attributes.
You can use function
? to access documentations and search for help in R. For even more general searches, you can use
#For help on the help function of R help() #For help on the paste function help(paste) #OR help("paste") #OR ?paste #OR ?"paste"
Visit https://www.r-project.org/help.html for additional information
You might wish to install RStudio after you have installed R. RStudio is a development environment for R that simplifies many programming tasks.
Visual Studio (starting from version 2015 Update 3) now features a development environment for R called R Tools, that includes a live interpreter, IntelliSense, and a debugging module. If you choose this method, you won't have to install R as specified in the following section.
(0. Ensure XQuartz is installed )
This will install both R and the R-MacGUI. It will put the GUI in the /Applications/ Folder as R.app where it can either be double-clicked or dragged to the Doc. When a new version is released, the (re)-installation process will overwrite R.app but prior major versions of R will be maintained. The actual R code will be in the /Library/Frameworks/R.Framework/Versions/ directory. Using R within RStudio is also possible and would be using the same R code with a different GUI.
brew install R
Those choosing the second method should be aware that the maintainer of the Mac fork advises against it, and will not respond to questions about difficulties on the R-SIG-Mac Mailing List.
You can get the version of R corresponding to your distro via
apt-get . However, this version will frequently be quite far behind the most recent version available on CRAN. You can add CRAN to your list of recognized "sources".
sudo apt-get install r-base
You can get a more recent version directly from CRAN by adding CRAN to your sources list. Follow the directions from CRAN for more details. Note in particular the need to also execute this so that you can use
install.packages() . Linux packages are usually distributed as source files and need compilation:
sudo apt-get install r-base-dev
sudo dnf install R
R is directly available in the
Extra package repo.
sudo pacman -S r
More info on using R under Archlinux can be found on the ArchWiki R page.
The most basic way to use R is the interactive mode. You type commands and immediately get the result from R.
Start R by typing
R at the command prompt of your operating system or by executing
RGui on Windows. Below you can see a screenshot of an interactive R session on Linux:
> sign, expressions can be typed in. Once an expression is typed, the result is shown by R. In the screenshot above, R is used as a calculator: Type
to immediately see the result,
2 . The leading
 indicates that R returns a vector. In this case, the vector contains only one number (2).
R can be used to generate plots. The following example uses the data set
PlantGrowth , which comes as an example data set along with R
Type int the following all lines into the R prompt which do not start with
## . Lines starting with
## are meant to document the result which R will return.
data(PlantGrowth) str(PlantGrowth) ## 'data.frame': 30 obs. of 2 variables: ## $ weight: num 4.17 5.58 5.18 6.11 4.5 4.61 5.17 4.53 5.33 5.14 ... ## $ group : Factor w/ 3 levels "ctrl","trt1",..: 1 1 1 1 1 1 1 1 1 1 ... anova(lm(weight ~ group, data = PlantGrowth)) ## Analysis of Variance Table ## ## Response: weight ## Df Sum Sq Mean Sq F value Pr(>F) ## group 2 3.7663 1.8832 4.8461 0.01591 * ## Residuals 27 10.4921 0.3886 ## --- ## Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1 boxplot(weight ~ group, data = PlantGrowth, ylab = "Dry weight")
The following plot is created:
data(PlantGrowth) loads the example data set
PlantGrowth , which is records of dry masses of plants which were subject to two different treatment conditions or no treatment at all (control group). The data set is made available under the name
PlantGrowth . Such a name is also called a Variable.
To load your own data, the following two documentation pages might be helpful:
str(PlantGrowth) shows information about the data set which was loaded. The output indicates that
PlantGrowth is a
data.frame , which is R's name for a table. The
data.frame contains of two columns and 30 rows. In this case, each row corresponds to one plant. Details of the two columns are shown in the lines starting with
$ : The first column is called
weight and contains
num , the dry weight of the respective plant). The second column,
group , contains the treatment that the plant was subjected to. This is categorial data, which is called
factor in R.
Read more information about data frames.
To compare the dry masses of the three different groups, a one-way ANOVA is performed using
anova(lm( ... )) .
weight ~ group means "Compare the values of the column
weight , grouping by the values of the column
group ". This is called a Formula in R.
data = ... specifies the name of the table where the data can be found.
The result shows, among others, that there exists a significant difference (Column
p = 0.01591 ) between some of the three groups. Post-hoc tests, like Tukey's Test, must be performed to determine which groups' means differ significantly.
boxplot(...) creates a box plot of the data. where the values to be plotted come from.
weight ~ group means: "Plot the values of the column weight versus the values of the column
ylab = ... specifies the label of the y axis. More information: Base plotting
q() or Ctrl-D to exit from the R session.
To document your research, it is favourable to save the commands you use for calculation in a file. For that effect, you can create R scripts. An R script is a simple text file, containing R commands.
Create a text file with the name
plants.R , and fill it with the following text, where some commands are familiar from the code block above:
data(PlantGrowth) anova(lm(weight ~ group, data = PlantGrowth)) png("plant_boxplot.png", width = 400, height = 300) boxplot(weight ~ group, data = PlantGrowth, ylab = "Dry weight") dev.off()
Execute the script by typing into your terminal (The terminal of your operating system, not an interactive R session like in the previous section!)
R --no-save <plant.R >plant_result.txt
plant_result.txt contains the results of your calculation, as if you had typed them into the interactive R prompt. Thereby, your calculations are documented.
The new commands
dev.off are used for saving the boxplot to disk. The two commands must enclose the plotting command, as shown in the example above.
png("FILENAME", width = ..., height = ...) opens a new PNG file with the specified file name, width and height in pixels.
dev.off() will finish plotting and saves the plot to disk. No output is saved until
dev.off() is called.