Example
For connection, here is a snippet to help you understand:
//Allows you to enumerate and communicate with connected USB devices.
UsbManager mUsbManager = (UsbManager) getSystemService(Context.USB_SERVICE);
//Explicitly asking for permission
final String ACTION_USB_PERMISSION = "com.android.example.USB_PERMISSION";
PendingIntent mPermissionIntent = PendingIntent.getBroadcast(this, 0, new Intent(ACTION_USB_PERMISSION), 0);
HashMap<String, UsbDevice> deviceList = mUsbManager.getDeviceList();
UsbDevice device = deviceList.get("//the device you want to work with");
if (device != null) {
mUsbManager.requestPermission(device, mPermissionIntent);
}
Now you have to understand that in java the communication takes place using package javax.smarcard which is not available for Android so take a look here for getting an idea as to how you can communicate or send/receive APDU (smartcard command).
Now as told in the answer mentioned above
You cannot simply send an APDU (smartcard command) over the bulk-out endpoint and expect to receive a response APDU over the bulk-in endpoint. For getting the endpoints see the code snippet below :
UsbEndpoint epOut = null, epIn = null;
UsbInterface usbInterface;
UsbDeviceConnection connection = mUsbManager.openDevice(device);
for (int i = 0; i < device.getInterfaceCount(); i++) {
usbInterface = device.getInterface(i);
connection.claimInterface(usbInterface, true);
for (int j = 0; j < usbInterface.getEndpointCount(); j++) {
UsbEndpoint ep = usbInterface.getEndpoint(j);
if (ep.getType() == UsbConstants.USB_ENDPOINT_XFER_BULK) {
if (ep.getDirection() == UsbConstants.USB_DIR_OUT) {
// from host to device
epOut = ep;
} else if (ep.getDirection() == UsbConstants.USB_DIR_IN) {
// from device to host
epIn = ep;
}
}
}
}
Now you have the bulk-in and bulk-out endpoints to send and receive APDU command and APDU response blocks:
For sending commands, see the code snippet below:
public void write(UsbDeviceConnection connection, UsbEndpoint epOut, byte[] command) {
result = new StringBuilder();
connection.bulkTransfer(epOut, command, command.length, TIMEOUT);
//For Printing logs you can use result variable
for (byte bb : command) {
result.append(String.format(" %02X ", bb));
}
}
And for receive/ read a response see the code snippet below :
public int read(UsbDeviceConnection connection, UsbEndpoint epIn) {
result = new StringBuilder();
final byte[] buffer = new byte[epIn.getMaxPacketSize()];
int byteCount = 0;
byteCount = connection.bulkTransfer(epIn, buffer, buffer.length, TIMEOUT);
//For Printing logs you can use result variable
if (byteCount >= 0) {
for (byte bb : buffer) {
result.append(String.format(" %02X ", bb));
}
//Buffer received was : result.toString()
} else {
//Something went wrong as count was : " + byteCount
}
return byteCount;
}
Now if you see this answer here the 1st command to be sent is :
PC_to_RDR_IccPowerOn command to activate the card.
which you can create by reading section 6.1.1 of the USB Device Class Specifications doc here.
Now let's take an example of this command like the one here: 62000000000000000000 How you can send this is :
write(connection, epOut, "62000000000000000000");
Now after you have successfully sent the APDU command, you can read the response using :
read(connection, epIn);
And receive something like
80 18000000 00 00 00 00 00 3BBF11008131FE45455041000000000000000000000000F1
Now the response received in the code here will be in the result variable of read() method from code
